EC1x Specifications (CE Approved)

Controller Section : Model TC10 (included in chamber cost)

Temperature Setpoint Range : -73 Deg C to +315 Deg C in 0.1 Deg C Steps (LN2 Option; -183Deg C to +315 Deg C)

Time at Temperature Range : 1.0 sec to 99 hrs 59 min 59 sec or Continuous

Temperature Ramping Rate Control : Locally Controlled from 0.01 Deg C / min up to the Specified Heat/Cool rate of Change

Programmable Set Temps and Times : Number of Set Temperatures and Times Limited only by Available Program Memory. Typically 100+ Segments

Absolute Error (not including probe error) : +/- 0.25 Deg C

Long Term Stability (per month) : +/- 0.2 Deg C

Temperature Resolution : 0.02 Deg C

Line Voltage Sensitivity (105-125 VAC) : +/- 0.1 Deg C

Programmable Temperature Loop Control : 1 to 65535 FOR / NEXT Loop Executions for 10 Loops, Nesting Supported

Temperature Control Technique : PID Algorithm / Pulse Width Modulated, Programmable from Keyboard or Remote Interfaces

Option to control to chamber probe or user probe

Local Operation : 26 Key Keypad / 2 line LCD Display

Remote Operation : Built-in IEEE-488 / RS232 / RS422 Interfaces

Additional I/O Capability : Electrically Isolated USER Temperature / Voltage Probe, 4 Channels of Analog Input and Analog Output, 16 Bit Address / 8 Bit Data Parallel Port, 56 KBit Auxiliary High Speed Serial Port, IEEE-488 to RS232 Transparent Mode, 5 Auxiliary Outputs, 8 Auxiliary Input

Safety Features : Open/Short Probe Detection, Adjustable Over Temperature Thermostat, Software Upper Temperature Limit

Convenience Features : Heat and Cool Enable/Disable Switches, Battery Backed Memory for Programs, Setup Menus for Probe CAL, Remote Interrupt Operation and Default Conditions for Alarms and Interfaces, Time of the Day Clock.