 |
 |
 |
|
 |
 |
 |
 |
|
 |
 |
|
|
 |
|
Synthesized Signal Generator, 10MHz to 40GHz with opt. 2B/19
Option 1, Rack Mounting. Rack mount kit containing a set of rack slides (90 tilt capability), mounting ears, and front panel
handles for mounting the instrument in a standard 19-inch
equipment rack.
Option 2A, 110 dB Step Attenuator. Adds a 10 dB per step attenuator with a 110 dB range for models having a high-end frequency of 20 GHz. Output power is selected directly in dBm on the front panel (or via GPIB). Rated output power is reduced.
Option 2B, 110 dB Step Attenuator. Adds a 10 dB per step attenuator with a 110 dB range for models having a high-end frequency of 40 GHz. Output power is selected directly in dBm on the front panel (or via GPIB). Rated output power is reduced.
Option 2C, 90 dB Step Attenuator. Adds a 10 dB per step attenuator with a 90 dB range for models having a high-end frequency of 50 GHz. Output power is selected directly in dBm on the front panel (or via GPIB). Rated output power is reduced.
Option 2D, 90 dB Step Attenuator. Adds a 10 dB per step attenuator with a 90 dB range for models having a high-end frequency
of 60 GHz. Output power is selected directly in dBm on the front panel (or via GPIB). Rated output power is reduced.
Option 2E, 120 dB Electronic Step Attenuator. Adds a 10 dB per step electronic attenuator with a 120 dB range for models having a high-end frequency of 8.4 GHz. Output power is selected directly in dBm on the front panel (or via GPIB). Rated output power is reduced.
Option 2F, 120 dB Electronic Step Attenuator. Adds a 10 dB per step electronic attenuator with a 120 dB range for models having a high-end frequency of 20 GHz. Output power is selected directly in dBm on the front panel (or via GPIB). Rated output power is reduced.
Option 9, Rear Panel RF Output. Moves the RF output connector to the rear panel.
Option 11, 0.1 Hz Frequency Resolution. Provides frequency resolution of 0.1 Hz.
Option 14, Rack Mounting without Chassis Slides. Modifies rack mounting hardware to install unit in a console that has
mounting shelves. Includes mounting ears and front panel handles.
Option 15A, High Power Output. Adds high-power RF components to the instrument in the 2–20 GHz frequency range. Option
15A is standard in models having a high-end frequency that is >40 GHz.
Option 16, High-Stability Time Base. Adds an ovenized, 10 MHz crystal oscillator with <5 x 10–10/day frequency stability.
Options 17A & 17B, No Front Panel. Deletes the front panel for use in remote control applications where a front panel display
or keyboard control are not needed. Option 17A deletes the front panel from 681XXC models; Option 17B deletes the front panel from 680XXC models.
Option 18, mmWave Module Bias Output. Provides bias output for 54000-xWRxx Millimeter Wave Source Modules. BNC Twinax connector, rear panel.
Option 19, SCPI Programmability. Adds GPIB command mnemonics complying with Standard Commands for Programmable Instruments (SCPI), Version 1993. SCPI programming complies with IEEE 488.2-1987.
* Option 21 - High Spectral Purity Down Converter. Adds CW, sweep, and pulse modulation frequency coverage from 10 MHz to 2.2GHz for models having a low end frequency of 10MHz. Provides ultra-low phase noise harmonics.
Option 22, 0.1 Hz to 10.0 MHz Audio Frequency. Adds frequency coverage below 10 MHz. In models having a high-end frequency
of 20 GHz, rated output power is reduced by 1 dB; in models having a high-end frequency of >20 GHz, rated output power is reduced by 2 dB.
|
|
|
All items are Used and Refurbished unless otherwise noted. - 5 Day Right Of Refusal - 90 Day Warranty.
Price and delivery are subject to availability.
|
|
|
 |
 |
|
 |
 |
 |
 |
|
 |
 |
|
|
|
